EJK Tuning Kit Fuel Controller Harley Davidson Softail 2016-2017

• Harley Davidson Softail 2016-2017
• Harley Davidson Dyna 110 2016-2017

Controller is protected by a MAP (minimum advertised price) policy.

This controller is NOT California ON-ROAD approved.
CARB E.O. D-654 controller available by phone order only.

SPECIFIC TECH INFORMATION

Controller comes with O2 Bypasses OX-023 and OX-024. Your stock O2 connections need to be disconnected and the bypasses installed.
Factory injector connections DO look different from the Dobeck controller connectors, but the male and female connections will plug in ok.
Installation of Injector Harness is front and rear specific – Your bike is equipped with Harley’s Engine Idle Temperature Management System (EITMS). When engine temperature exceeds 284° F, the EITMS will turn off the rear cylinder fuel injector. Idle speed will be maintained, however the rear cylinder will become an “air pump” which will work to cool the engine. MT Pockets Performance controllers power-up through our channel 1 injector connection. The connector pair with double pinned RED and YELLOW wires is channel 1 and should be connected to the FRONT cylinder.